Advantages of Compressor Maintenance

Posted on August 1, 2013 at 9:47 am

It is very important to always perform compressor maintenance so as to have efficient performance of your system. By ignoring the basic maintenance, the system starts to lag and breakdown eventually. So as to evade very high cost every now and then as well as electric bills, you should never forget to proper properly do maintenance on your equipment. Slow down of your air compressor result to slow down of your business as well.
For proper compressor maintenance, always remember to check the following;
Inlet filter
This part function as a silencer and it need regular inspection to ensure that it is cleaned properly. In case the filter is very dirty, it lessen the operating efficiency as a result of increasing the wear on components. There can be extensive damage caused by system contamination in case the intake start to leak.
Motor and compressor.
These are among the most crucial parts of the machine hence must never be ignored. In case there is acknowledgement of any unusual vibrations or noises, the cause should be located immediately and fixed.
Lubrication
In case the compressor is not lubricated thoroughly, its parts will definitely start to break down hence may result to high repair cost. Always ensure that proper grade and weight of oil as stated by the manufacturer is used in lubricating the machine. So as to reduce the buildup of sludge and varnish, it is important to always keep the component parts as well as reservoir of the oil clean. Regular changing of oil is the best way to achieve this since there is lessening in fabrication hence increase in wear when oil break down and thin out.
Gauges and controls.
You should ensure that all the gauges as well as instruments are properly calibrated and working as a way of making sure that your equipment is working at the highest capacity. There might be an effect to the reading the instrument put out as a result of moisture and any other contaminants.
Ambient.
The ambient or surrounding atmosphere should always be kept clean and free of debris. For proper cooling, the area needs to be ventilated well since the machine will overheat and strain the system of the compressor when the machine cannot ventilate well.
Worn parts
Worn parts may cause vibrations, imbalances as well as noises. Usually, the loose components and friction may be inaudible hence there is need to do periodic micrometer as well as seal tests which help in prolonging the life of the machine
Working with electricity, machinery as well as compressed air can be very dangerous. It is therefore very important to give your safety a first priority. Always remember to lock out and disconnect the supply of electricity when performing the compressor maintenance. Before they begin of any maintenance, the system should be relieved of all pressure as well. Do not put off the problem for later solving when discovered.  Always take the immediate action of resolving the problem in hand. By doing this, you could be preventing many more other problems that could have occurred.

Posted in Engineering